www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
27
• Original operating instructions
• Saw blade
4. Intended use
The bandsaw is designed to perform longitudinal and
-
vices.
misuse. The user / operator and not the manufactur-
caused as a result of this.
-
tions and the operating instructions to be found in
this manual.
All persons who use and service the machine have
to be acquainted with this manual and must be in-
formed about the machine’s potential hazards.
It is also imperative to observe the accident preven-
-
plies for the general rules of occupational health and
from such changes.
Even when the machine is used as prescribed it is
still impossible to eliminate certain residual risk fac-
with the machine’s construction and design:
•
• Harmful emissions of wood dust when used in
closed rooms.
•
zone.
• Injuries (cuts) when changing the blade.
• -
pieces.
•
• Kickback.
• Tilting of the workpiece due to inadequate support.
• Touching the blade.
•
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial ap-
is used in commercial, trade or industrial businesses
or for equivalent purposes.
5. General safety information
be observed when using electric tools for protection
Read all these notices before using the electric tool
Safe work
1
– Disorder in the work area can lead to accidents.
2
– Do not expose electric tools to rain.
– Do not use electric tools in a damp or wet en-
vironment.
– Make sure that the work area is well-illuminated.
– Do not use electric tools where there is a risk
3
–
pipes, radiators, electric ranges, cooling units).
4
– Do not allow other persons to touch the equip-
area.
5
–
elevated or closed location out of the reach of
children.
6
– -
7 Use the correct electric tool
–
work.
– Do not use the electric tool for purposes for
which it is not intended. For example, do not
use handheld circular saws for the cutting of
branches or logs.
–
8 Wear suitable clothing
–
can become entangled in moving parts.
– When working outdoors, anti-slip footwear is
recommended.
– Tie long hair back in a hair net.
9 Use protective equipment
– Wear protective goggles.
–
work.
10
processing wood, materials similar to wood, or
plastics.
– If connections for dust extraction and a collect-
To Next Page
Loading...
Need help?
General
