www.scheppach.com
GB
|
29
operating instructions to be found in this manual.
All persons who use and service the machine have to
be acquainted with this manual and must be informed
about its potential hazards. It is also imperative to ob-
serve the accident prevention regulations in force in
The same applies for the general rules of occupational
m Important!
-
Please read the complete operating instructions and
in a safe place, so that the information is available
at all times.
-
tions as well.
which arise due to a failure to follow these instructions
from such changes.
Even when the machine is used as prescribed it is still
impossible to eliminate certain residual risk factors.
the machine’s construction and design:
• Contact with the saw blade in the uncovered saw
zone.
•
• Kick-back of workpieces and parts of workpieces
• Saw blade fracturing.
•
•
worn.
• Harmful emissions of wood dust when the machine
is used in closed rooms.
m Please note that our equipment has not been de-
signed for use in commercial, trade or industrial ap-
is used in commercial, trade or industrial businesses
or for equivalent purposes.
•
• -
port damage.
•
period has expired.
m ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, lm and small parts! There is a risk of swal-
lowing and suocation!
• Legs 4x (16)
• Long crossbar 2x (17)
• Short crossbar 2x (18)
• Support strut long 2x (21a)
• Support strut short 2x (21b)
• Cross member 4x (21c)
• Support frame 2x (16b)
• Bench extension 2x (8)
• Rubber feet 4x (16a)
• Rip fence (15)
• Saw blade guard (4)
• Transverse stop (7)
• Suction hose (5)
• Push stick (9)
• Ring spanner 10/21 mm (22a)
• Ring spanner 10/13 mm (22b)
• Hexagon head bolt 32x (19)
• Hexagon head nut 24x (20)
• Riving knife (6)
4. Intended use
with the machine’s size.
roundwood.
-
pose.
a case of misuse. The user/operator and not the manu-
-
ing such cases of misuse.
be used for the machine.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
