Scheppach sd1600v User Manual

www.scheppach.com
GB
|
35
12.3 Service information
With this product, it is necessary to note that the follow-
ing parts are subject to natural or usage-related wear,
or that the following parts are required as consuma-
bles.
Wearing parts*: Carbon brushes, saw blade, table inlay
* may not be included in the scope of supply!
12.4 Ordering spare parts
Please provide the following information when ordering
spare parts (via the service hotline):
• Device type
• Device article number (can be found on the packag-
ing or in the instructions)
Spare parts and accessories can be obtained from our
service centre. To do this, scan the QR code on the
cover page.
13. Storage
Store the device and its accessories in a dark, dry and
frost-free place that is inaccessible to children. The op-
timum storage temperature lies between 5 and 30 ˚C.
Store the electric tool in its original packaging.
14. Disposal and recycling
The device is supplied in packaging to avoid
transport damages. This packaging is raw ma-
terial and can thus be used again or can be
reintegrated into the raw material cycle.
The device and its accessories are made of
different materials, such as metals and plas-
tics. Take defective components to special waste dis-
posal sites. Check with your specialist dealer or munic-
ipal administration!
Do not throw old equipment away with household
waste!
This symbol indicates that this product must
not be disposed of in household waste as per
Waste Electrical and Electronic Equipment di-
rective (2012/19/EU) and national laws. This
product must be handed over at the intended collection
point. This can be done, for example, by returning it
when purchasing a similar product or delivering it to an
authorised collection point for the recycling of old elec-
trical and electronic devices.
Improper handling of old devices can have nega-
tive effects on the environment and on human health
due to potential hazardous materials which are often
contained in old electrical and electronic devices. By
disposing of this product properly, you are also con-
tributing to the effective use of natural resources. In-
formation about collection points for old devices can
be found at your municipal authority, the local disposal
provider, an authorised location for the disposal of old
electrical and electronic devices or your waste collec-
tion service.

Scheppach sd1600v Specifications

General

Blade length	134 mm
Throat depth	406 mm
Product color	Black, Blue
Stroke height	50 mm
Idle speed (max)	1700 RPM
Idle speed (min)	500 RPM
Table tilt range	0 - 45 °
Maximum power	120 W
AC input voltage	220-240 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	630 mm
Width	295 mm
Height	370 mm
Weight	12700 g
Table depth	415 mm
Table width	255 mm