schildknecht DATAEAGLE COMPACT 4 Series - Page 5

Montage und Inbetriebnahme DATAEAGLE 4XXX Compact
5.3.2. Remove old module 5-20
5.3.3. Install new module 5-20
5.3.4. Start Dataeagle Wizard 5-21
5.3.5. Procedure for exchanging radio modules 5-22
5.3.6. Example 1: Exchange of a Radio Slave 5-23
5.3.7. Example 2: Exchange of a radio master 5-30
6. Increasing the system availability (Profinet only) 6-1
6.1. Function 6-1
6.2. Setting of the filter time at Radio Master and Radio Slave 6-1
6.3. Typical values for the filter time 6-5
6.3.1. Default 6-5
6.3.2. Recommendation for operation 6-5
6.3.3. Recommendation for commissioning 6-5
6.3.4. Recommendation for applications with Profisafe 6-5
7. Dismantling and disposal 7-1
8. Tips and Tricks 8-1
8.1. Improving the EMC safety 8-1
8.1.1. Introduction 8-1
8.1.2. Basic guidelines 8-1
8.2. Guidelines for optimized installation of antennas 8-5
8.3. Advices for troubleshooting 8-7
9. Technical specifications 9-1