Installation and commissioning DATAEAGLE 4XXX Compact 5-33
Display
addresses
Chapter 5 – Extension and exchange
Double-click on the device name and then double-click
on „Radio“.
The radio module addresses are shown, e.g.:
The Radio Slave has station address 02. The partner ad-
dress is 01 = station of the Radio Masters.
Note station and partner address.
If you do not know the station addresses of all further Radios
Slaves you have to read them off by using the Dataeagle
Wizard and note them as well.
The further procedure depends on the type of the radio
module (Dataeagle 43XX with 869 MHz or Dataeagle
47XX Bluetooth).
To Next Page
Loading...
