SCHÖLLY FIBEROPTIC LED Light Source - Compatible Light Guides

1 General Information about the Device
1.2 Product Description
Rear view
Figure 1-2: Rear view of the light source.
1
Fuse holder
2
Connection for power cord
3
Main power switch
4
Potential equalization terminal
5
MIS-Bus ports
6
Port for service (covered)
1.2.3 Compatible Light Guides
The product is compatible with cold light guides and high-power light guides sup-
plied by Karl Storz, Richard Wolf, Olympus and our own company:
Fiber bundles of 3.5 to 4.8 mm Ø
Length up to 300 cm
en
Instructions For Use | 13 - Mar - 2020 | Version: B Page 47 of 78