SCHOTT Instruments ProLab 2000 - Page 28

Operation ProLab 2000
28
ba75577e03 11/2009
5 Change and confirm the setting with <▲><▼> and <MENU/
OK>.
The hours are highlighted.
6 Change and confirm the setting with <▲><▼> and <MENU/
OK>.
The time is set.
7 If necessary, set the Date and Date format. The setting is made
similarly to that of the time.
8 If necessary, select and set the Date with <▲><▼> and
<MENU/OK>.
9 To make further settings, switch to the next higher menu level
with <ESC>.
or
Switch to the measured value display with <MODE>.
The meter is in the measuring mode.