Operation ProLab 2000
80
ba75577e03 11/2009
4.9 Storage
You can transmit measured values (datasets) to the data storage in two
ways:
z Manual storage (see page 81)
z Automatic storage at intervals (see page 82)
Each storage process transmits the current dataset to the interface at
the same time.
Measurement dataset A complete dataset consists of:
z Date/time
z USER ID
z Meter designation with series number
z SENSOR ID
– Sensor designation
– Sensor series number
z SAMPLE ID
z Measured value of the connected sensor
z Measured temperature value of the connected sensor
z Info on stability control: SC appears with the measured value if the
Stability control criterion was met while storing (stable measured
value). Otherwise, there is no SC display.
z Measurement conditions
Storage locations The meter has separate data storages for manually stored measured
values and automatically stored measured values.
Storage Maximum number of datasets
Manual storage 308
Automatic storage 2244
To Next Page
Loading...