SCHOTT Instruments ProLab 2000 - System

Operation ProLab 2000
34
ba75577e03 11/2009
4.4.3 System
Overview The following sensor-independent meter features can be adjusted in
the system menu/System and its submenus:
z Menu language
z Beep on keystroke
z Display illumination
z Display contrast
z Unit of the temperature display
z Data interface
z Clock and date function
z Function to reset all sensor-independent system settings to the
default condition
Settings In the measured value display, open the system menu with <MENU/
OK
_>. After completing the settings, switch to the measured value
display with <MODE>.
Menu item Setting Description
System / General /
Language
Deutsch
English
(further)
Select the menu language
System / General /
Beep
On
Off
Switch on/off the beep on
keystroke
System / General /
Illumination
On
Off
Switch the display illumination
on/off
System / General /
Contrast
0 ... 100 % Change the display contrast
System /
Measurement /
Temperature unit
°C
°F
Temperature unit, degrees
Celsius or degrees Fahrenheit.
All temperatures are displayed
with the selected unit.
System /
Measurement /
Stability control
Auto
Off
Switch on or off the automatic
Stability control (see page 35).
System / Interface /
Baud rate
1200, 2400,
4800, 9600,
19200
Baud rate of the data interface