SCHOTT Instruments ProLab 2000 - 5 Maintenance, Cleaning, Disposal; Maintenance

ProLab 2000 Maintenance, cleaning, disposal
95
ba75577e03 11/2009
5 Maintenance, cleaning, disposal
5.1 Maintenance
The only maintenance activity required is replacing the batteries.
Note
For maintenance of the measuring cells and electrodes refer to the
relevant operating manuals.
Replacing the batteries
1 Using a screw driver, unscrew the screws (2) of the lid of the
battery compartment.
2 Open the battery compartment (1) on the underside of the
meter.
3 Remove the four batteries from the battery compartment.
4 Place four new batteries (type Micro AAA) in the battery
compartment.
5 Close the battery compartment (1).
The date (day) flashes on the display.
6 Using a screw driver, tighten the screws (2) of the lid of the
battery compartment.
7 Set the date and time (see page 27)
1
2