What to do if I get ERROR_HARDWARE_BRAKE on my Schuchmann MOMO?
If you are getting an ERROR_HARDWARE_BRAKE on your Schuchmann Bicycle, it is likely due to an overcurrent switch-off. To resolve this, remove the battery and inspect the contacts. If the contacts appear fine, reinsert the battery and restart the system. If the contacts are visibly damaged or the error persists, it's recommended to contact your specialist dealer.
What to do if ERROR_I_OFFSET appears on my Schuchmann MOMO Bicycle display?
If you encounter an ERROR_I_OFFSET on your Schuchmann Bicycle, it indicates a current measurement error, possibly due to damaged contacts on the battery. Remove the battery and inspect the contacts. If they seem okay, reinsert the battery and restart the system. If the contacts are visibly damaged or the error continues, it's recommended to contact your specialist dealer.
What to do if my Schuchmann MOMO shows ERROR_HALL?
If you receive an ERROR_HALL on your Schuchmann Bicycle, the cause is a faulty motor signal. You should check the motor signal cable and restart the system. If the motor signal cable is visibly damaged or the error continues, it's recommended to contact your specialist dealer.
General| Brand | Schuchmann |
|---|---|
| Model | MOMO |
| Category | Bicycle |
| Language | English |
Read instructions carefully before use, protect skin from sun-heated parts.
Intended use for children, youths, adults for outdoor mobility and physiotherapy. Includes indications and contraindications.
Guidelines on safe operation, weight limits, clothing, and rider responsibilities.
Detailed list of saddles, saddle posts, and holding brackets with specifications.
Instructions on how to adjust the spring element and travel of the stabilisers.
Detailed steps for adjusting handlebar height and position for optimal user comfort.
Guide to adjusting saddle height and horizontal position based on user inseam length.
Overview of available brake types and their functions.
Instructions for using and adjusting the parking brake lever and brake blocks.
Procedure for checking and adjusting chain tension for optimal operation.
Instructions for adjusting and dismantling the height-adjustable push bar.
Guide to adjusting continuously adjustable crank shorteners for knee flexibility.
Procedure for mounting and adjusting crank shorteners for varying crank lengths.
Information on special cranks for users with knee contractures.
Details on foot positioning pedals with balancing weight and strap adjustment.
How to adjust foot pans with leg guidance for stability and reduced leg rotation.
Adjusting dynamic leg guidance for controlled leg rotation and foot joint stabilization.
Details on switching the E-drive on/off, lighting, and assistance levels.
Information on locking, removing, and charging the E-drive battery.
Guidelines for cleaning and disinfecting the bicycle to ensure safety and appearance.
Steps for regular cleaning using mild detergent, avoiding high-pressure equipment.
Instructions for lubricating and checking chain tension after use, especially after rain.
Requirement for professional maintenance every 1000 km or annually by a specialist dealer.
Detailed list of checks and adjustments for various bicycle components.
Information on user responsibility for repairs not performed by a specialist dealer.
Table of error codes, their causes, and troubleshooting steps for the drive system.
Technical specifications for the E-drive system, including motor, control, and battery.
To Next Page