Schuchmann MOMO - 8.1.3 Chain maintenance; 8.2 Servicing; controls; 8.3 Maintenance

35
8. Cleaning and servicing.
8.1.3 Chain maintenance
Drive chains must be regularly cared for. This is in particular the case after
riding in rain. The chain must be lubricated with a commercially available
chain oil. Due to the expansion of the chain which is a natural result of use,
regular inspection of the chain tension is required (see Point 3.4).
8.2 Servicing / controls
Please carry out a daily visual inspection and check the bicycle regularly
for cracks, breaks, missing parts and malfunctions. In case of a defect or
malfunction, please contact the specialist dealer who supplied you with
the product (see Point 11.5).
8.3 Maintenance
For reasons of user safety and to maintain product liability, maintenance
needs to be carried out every 1000 km, however at least once a year, by
a specialist dealer (see Point 11.5). The maintenance work carried out must
be documented in the maintenance plan (see Point 8.3.2). The electric dri-
ve (incl. battery pack) does not require maintenance if used properly and
carefully.
8.3.1 Maintenance specications
• Check the chain and chain tension, adjust if necessary, clean and oil.
• Check rear wheel track, adjust if necessary.
• Check bottom bracket and lubricate if necessary.
• Lubricate pedal bearing, check bearing clearance and if necessary
adjust or replace.
• Check the hub gear and adjust if necessary.
• Check the brake system for function, adjust if necessary. If the braking
eect is poor, check the condition of the hand lever, cable, brake lever
and brake lining, readjust and replace if necessary.
• Lubricate joints and bearing points.
• Replace kinked or clamped cables.
• Check rims for side and top impacts.
• Check the spoke tension and adjust if necessary.
• Check the tyre profile.
• Check the lighting and signal system.
• Check rear hub and lubricate if necessary.
• Check frame and fork for damage and replace if necessary.
• Have a current leakage measurement of the E-drive carried
out annually.
• Check the fixation of all cables and parts.
• Check the function of the entire electrical system.
• Check the operational safety of the battery.