Schuchmann MOMO - 1. Preparation; 1.2 Safety measures prior to use

05
1. Preparation.
1.1 Delivery
On receiving the product, please check it for completeness, lack of faults
and any transport damage. Inspect the goods in the presence of your
forwarder. Should transport damage have occurred, please arrange for
an inventory (determination of the faults) to be made in the presence of
the forwarder. Please send a complaint in writing to the specialist dealer
responsible.
1.2 Safety measures prior to use
The correct use of the product requires a detailed and careful instruction
of the user or the accompanying person. We ask you to read through the
Instructions for use carefully prior to initial commissioning of the product,
and to observe them. It is possible that product parts that get in contact
with the skin may heat up in the sun. Cover these areas or protect the
device from direct sunlight.
1.3 Safe disposal
In order to preserve and protect the environment to prevent environmental
pollution and to improve the recycling of raw materials, please note the
disposal instructions in points 1.3.1 and 1.3.2.
1.3.1 Packaging
The product packaging should be stored in case the product needs to be
transported again. If you need to return the product to us for repairs or
in the event of warranty claims, kindly use, if possible, the original carton
box so that the product is optimally packaged. Recycle the packaging
materials according to their type.
Do not leave packaging materials unattended, as they are a possible source of
danger.
1.3.2 Product
Separate the raw materials used in the product for recycling according to
their classification (see material information under Point 2.1). The electrical
components and the drive system battery must not be disposed of with
household waste. These must be returned to the designated public collec-
tion points or to your specialist dealer (see Point 9.5).
1.4 Where to store the Instructions for use
Please store these Instructions for use carefully and ensure that these
Instructions for use remain with the product in case of re-use.