25
4. Accessories.
4.6 Handlebar lock limiter
The handlebar lock limiter can be adjusted to
determine the direction of travel. In order to
adjust the handlebar lock limiter, please loosen
all grub screws (A) and bring the limiter (B) into
the required position. You can determine the
direction by moving both limiters (B) towards
the handlebar stop (C) and tightening them.
If possible please leave the settings on the hand-
lebar lock limiter as set at the factory!
4.7 Holding bracket with mount
The holding bracket with mount permits the
mounting of head, torso or pelvic supports
that provide extra stability to the therapy
cyclists. Included in the scope of delivery is
the black bracket adapter, which is moun-
ted onto the T-saddle post. Then the holding
bracket is pushed into the holding socket (D)
and can be adjusted in depth. To do this,
simply adjust the required position and then
tighten the screws (E).
The use of the holding bracket is exclusively pos-
sible in combination with the T-saddle post!
A
B
C
D
E
D
Height
Depth
To Next Page
Loading...