SCHUNK PWG-S 40 Translation Of The Original Manual

Troubleshooting
20 02.02|PWG-S 40 - 80|en
The gripping force drops?
Possible cause Corrective action
Compressed air can escape Check seals, if necessary disassemble mod-
ule and replace seals.
Too much grease in the mechanical motion
spaces of the module
Clean the module and relubricate it.
(
 9, Page 21)
Pressure drops below minimum. Check the air supply.
( 7.2, Page 14)
8.3
www.comoso.com

SCHUNK PWG-S 40 Specifications

General

Brand	SCHUNK
Model	PWG-S 40
Category	Power Tool
Language	English