02.02|PWG-S 40 - 80|en
9
Using personal protective equipment
When using this product, observe the relevant industrial safety
regulations and use the personal protective equipment (PPE) re-
quired!
• Use protective gloves, safety shoes and safety goggles.
• Observe safe distances.
• Minimal safety requirements for the use of equipment.
Notes on particular risks
Generally valid:
• Remove the energy supplies before installation, modification,
maintenance, or adjustment work.
• Make sure that no residual energy remains in the system.
• Do not move parts by hand when the energy supply is con-
nected.
• Do not reach into the open mechanism or the movement area
of the unit.
• Perform maintenance, modifications, and additions outside the
danger zone.
• Secure the product during all operations against uncontrolled
activation.
• Take a precautionary approach by maintenance and disassem-
bly.
• Only specially trained staff should disassemble the product.
WARNING
Risk of injury from objects falling and being ejected
• The danger zone must be surrounded by a safety fence during
operation.
2.6
2.7
To Next Page
Loading...
Need help?
General
