Translation of original declaration of incorporation
28 02.02|PWG-S 40 - 80|en
Translation of original declaration of incorporation
in terms of the Directive 2006/42/EG, Annex II, Part 1.B of the European Parliament and of
the Council on machinery.
Manufacturer/
Distributor
SCHUNK GmbH & Co. KG Spann- und Greiftechnik
Bahnhofstr. 106 – 134
D-74348 Lauffen/Neckar
We hereby declare that on the date of the declaration the following incomplete machine
complied with all basic safety and health regulations found in the directive 2006/42/EC of
the European Parliament and of the Council on machinery. The declaration is rendered
invalid if modifications are made to the product.
Product designation: 2-finger angular gripper / PWG-S 40 - 80 /
ID number 0302611, 0302612, 0302613
The incomplete machine may not be put into operation until conformity of the machine
into which the incomplete machine is to be installed with the provisions of the Machinery
Directive (2006/42/EC) is confirmed.
Applied harmonized standards, especially:
EN ISO
12100:2011-03
Safety of machinery - General principles for design - Risk assessment
and risk reduction
The manufacturer agrees to forward on demand the relevant technical documentation for
the partly completed machinery to state offices.
The special technical documents according to Appendix VII, Part B belonging to the in-
complete machine have been compiled.
Person authorized to compile the technical documentation:
Robert Leuthner, Address: see manufacturer's address
Lauffen/Neckar, January 2014
p.p. Ralf Winkler, Head of Gripping
Systems Development
13
To Previous Page
Loading...
Need help?
General
