scil element RC User Manual

__________________________________________________________________________
Vers. 20210510ENG Page 33
Table 1 – Guide and manufacturer's statement—electromagnetic emissions. The product is
intended to be used in the electromagnetic environment specified.
Emission Test
Compliance
Environmental Guidance
Radio frequency emission
GB 4824
Group 1
The product uses RF energy only for its internal
functions. Therefore, its RF emissions are low
and there is little possibility of interference with
electronic equipment.
Radio frequency emission
GB 4824
Class A
The product is suitable for use in all facilities
that are not directly connected to the home and
to the public low-voltage grid of the residential
home.
Harmonic emission
GB 17625.1
Not applicable
Voltage fluctuation/
Scintillation emission GB
17625.2
Not applicable
Table 2 – Guide and manufacturer's statement—electromagnetic immunity. The product is
intended to be used in the electromagnetic environment specified.
Immunity test
IEC 61326 Test Level
Guide
Coincidence level
Environmental
Guidance
Electrostatic rotorharge
GB/T 17626.2
±4 Kv Contact
rotorharge
±8 kV Air rotorharge
±4 kV Contact
rotorharge
±8 kV Air rotorharge
The floor should be
made of wood,
concrete or ceramic
tiles. If the floor is
covered with synthetic
materials, the relative
humidity should be at
least 30%.
Electrical Fast
Transient/Burst
GB/T 17626.4
±1 kV to power cord
±1 kV to power cord
Network power supply
should have the quality
of use in typical
commercial or hospital
environments.
Electrical surge
GB/T 17626.5
±1 kV Line to line
±2 kV Line to ground
±1 kV Line to line
±2 kV Line to ground
Network power supply
should have the quality
of use in typical
commercial or hospital

scil element RC Specifications

General

Brand	scil
Model	element RC
Category	Measuring Instruments
Language	English