ScorpionExo EXO-COM - Intercom Pairing with Other Brands; Other Brand Preparation; EXO-COM Pairing Procedure

13
Intercom Pairing
Setup (Other Brand)
Intercom Pairing (Other Brand) Setup
2
1
3
4
If the LED is purple, take off
your hand from the device,
and wait until LED turns green.
If the LED is green, you are
succesfully connected. If the
LED is purple, go back to step 1.
Set up other brand in "Phone Pairing mode”
(please refer to other brand user
manual)
From OFF MODE,
Press POWER until LED turns
to purple (about 15 sec.)