3
Stationary Air Compressor System Operating Instructions
IMPORTANT
Follow ALL recommended procedures and
safety precautions as provided in this manual.
Federal, State and local codes mandate safety
precautions and procedures for the handling and
production of breathable air. Consult State and local
occupational health and industrial safety ordinances
for additional requirements.
Safety Notations
The following types of safety notations are used
throughout this manual:
NOTE
Notes are used to notify the operator of installation,
operation, or maintenance information that is
important but not hazard-related.
Danger is used to indicate the presence of a hazard
that will cause severe personal injury, death, or
substantial equipment damage if the warning is
ignored.
Warning is used to indicate the presence of a hazard
which may cause severe personal injury or substantial
component damage if the warning is ignored.
Caution is used to indicate the presence of a hazard
which can cause minor personal injury or component
damage if the warning is ignored.
Safety Labels
Note the safety labels that are afxed to the unit as a
reminder of important safety precautions. Always read
and understand all safety labels prior to operating the
unit. Safety labels should never be removed, defaced,
or covered.
Read and follow all safety labels on the unit.
To Next Page
Loading...