EasyManua.ls Logo

SCP SCIENCE DigiPREP - DigiPREP HT Instruction Manual

Default Icon
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
KeyPad
Version 1.0
SCP SCIENCE
47
INTRODUCTION
DigiPREP HT is a high temperature digestion block capable of heating to 450
o
C. DigiPREP HT
is available in four styles; DigiPREP HT 250 with 10 or 20 positions which are used with 250ml
digestion tubes; DigiPREP HT 100 with 10 or 40 positions which are used with 100ml tubes.
Digestion tubes are also available calibrated. They may be made of borosilicate glass or made of quartz. The
assembly, installation and operation of each of these blocks is quite similar; the main difference is the number
and volume of digestion tubes they hold.
The heating cycle is controlled by a Colour Touch Screen or KeyPad controller. One should refer to the
controller manual for the correct setup and its operations. It is important that the controller be set to the 'HT' block
setting from the 'UTILITIES' screen of the controller in use. This will ensure optimal heating control of the
block.
DigiPREP HT typically comes with a manifold, insert rack, and related accessories for performing high
temperature digestions (up to 450
0
C). The SiC coated graphite block,and Tefl on coated components, are
meant to handle the harsh environment of the laboratory. The system should provide many years of continued
service with minimal maintenance.
It is understood that the operator of this equipment is qualifi ed to do so. If training is required please contact
your local distributer or the main offi ce of SCP SCIENCE.

Table of Contents

Related product manuals