SCP SCIENCE
8
KeyPad
Version 1.0
BASIC VERIFICATION LIST
1. Visual and physical inspection
□ All parts are included.
□ Power cord is fully inserted
□ All connectors and cables are inserted accordingly
□ The system powers up correctly
□ Cable connector looks fi ne (not bent)
Comments and observations:
___________________________________________
___________________________________________
___________________________________________
___________________________________________
___________________________________________
___________________________________________
2. Display
□ Touch Screen and LCD Backlight are working
□ Banner Screen is appearing
□ Main menu screen is appearing
□ Fonts and video color are correct
□ The touch Screen is sensing fi nger pressing.
□ The touch screen has been calibrated (from the
calibration screen)
Comments and observations:
___________________________________________
___________________________________________
___________________________________________
___________________________________________
___________________________________________
___________________________________________
3. Power Supply
□ The Fuses are fi ne
□ Power cables are correctly inserted (see page 26)
Comments and observations:
___________________________________________
___________________________________________
___________________________________________
___________________________________________
___________________________________________
___________________________________________
4. Heater Drive Circuit
□ DigiPREP block is connected to the controller
□ DigiPREP block is heating accordingly
□ 'COM2' dongle is correctly inserted and passes
ohmic check
□ DigiPROBE is correctly inserted into its socket
(N/A for HT)
Comments and observations:
___________________________________________
___________________________________________
___________________________________________
___________________________________________
___________________________________________
___________________________________________
To Next Page
