KeyPad
Version 1.0
SCP SCIENCE
49
OPERATIONAL PRECAUTIONS
DigiPREP HT must be grounded. In the event
of an electrical short circuit, grounding reduces the
risk of electrical shock by providing an escape wire
for electrical current. DigiPREP HT is supplied with
an umbilical cord that has a ground wire that is
connected through the controller to earth ground.
Ensure that the plug is plugged into an outlet that
has been properly installed and grounded. Consult
a qualifi ed electrician if there is any doubt about the
existence of proper grounding at the outlet.
DigiPREP HT is designed to be lifted from
the bottom only. Ensure that the controller is
disconnected prior to moving the system. Do not at-
tempt to lift the system by the top white trim or the ‘U’
channel as damage may result.
DigiPREP HT is an elevated-temperature
digestion system with exposed hot surfaces. Be
careful around the instrument when it is in operation.
DigiPREP HT digestion block should be
operated in a fully functional fume hood.
SAFETY INFORMATION
A minimum of safety considerations must be
followed when working with the DigiPREP HT in
order to maintain good laboratory practice:
• Do not place the DigiPREP HT on a surface
containing fl ammable material.
• DigiPREP HT requires a clearance of 3 inches
on all sides.
• DigiPREP HT must be operated in a fume hood.
• Do not place the DigiPREP controller in a fume
hood.
• DigiPREP HT is connected to a DigiPREP
controller.
• DigiPREP HT requires 230V ± 10% three-prong
grounded outlet.
To Next Page
Loading...
