SCP SCIENCE
62
KeyPad
Version 1.0
DigiPREP JR BLOCK DESCRIPTION
1. DigiPROBE Connector-Connection port
for DigiPROBE. DigiPROBE will allow
direct monitoring and control based on
actual sample temperature. DigiPROBE
Dongle must be installed to run the
DigiPREP Jr without the DigiPROBE
option.
2. Cable Connector – Connection port for the
DigiPREP Jr umbilical cable to the
controller.
3. Power Switch/ Power Cord Receptacle –
On/Off switch – contains circuit breaker
and receives the female end of the power
cord.
4. DigiSET Connector – Connection port
for DigiSET. DigiSET will automatically
shut off the digestion block when a pre-set
sample volume is reached. DigiSET
dongle must be installed to run DigiPREP
Jr without the DigiSET option.
5. DigiPREP Controller – DigiPREP Jr is
designed to be used with DigiPREP
KeyPad* or Touch Screen* controller
(*Sold separately)
6. DigiPROBE (Option) – To monitor and
control sample or block temperature.
7. DigiPROBE Storage Well – Use with
replaceable glass liner.
8. Voltage Selector Switch - Select appropriate
voltage. If 115 V is showing, system is
running at 115 volts.
To Next Page
Loading...
