SCP SCIENCE
50
KeyPad
Version 1.0
Unpacking
Retain all packing material in case you
need to return the instrument to the
manufacturer for service.
1. Verify that all components listed have been
included:
• DigiPREP HT system
• Operation manual
• Exhaust Manifold
• Dual-Zone Tube Rack
• Rack and Manifold support
• Thumb screws (6pc)
• Drip tray
• Exhaust connection hose
• Water Jet
• Boiling Rods
DigiPREP HT BLOCK DESCRIPTION
Optional items, such as glass,
quartz, calibrated or non-calibrated
digestion tubes may have been
included in the shipment. Carefully
check the packing list(s) and the
contents of shipping cartons to
verify that all items listed are included.
Please notify SCP SCIENCE or
your local distributor of any
discrepancies.
Inspect the products for any shipping damage.
If the instrument has been damaged in shipping,
contact the freight carrier to report damage and
to fi le a damage report. Also contact the SCP
SCIENCE service department to report damage
and to request service information (see page 88 for
contact information).
If damage is noted, do not attempt to
operate the instrument.
1. Exhaust manifold module
2. Dual-zone Tube Rack
3. Umbilical cable (to connect to controller)
4. Digestion Tubes
5. Drip Tray
6. Thumb Screws (6)
7. Dual PROBE Connection (option)
8. Glass Water Jet
NOTE
NOTE
WARNING
Boiling Rods
(pack of 40)
8
Heat Shield (optional)
1
2
3
4
5
6
7
To Next Page
Loading...
