SCP SCIENCE
68
KeyPad
Version 1.0
DigiPREP HP BLOCK DESCRIPTION
1. DigiPROBE Connector – Connection port
for DigiPROBE. DigiPROBE will allow
direct monitoring and control based on
actual sample temperature. DigiPROBE
Dongle must be installed to run the
DigiPREP MS without the DigiPROBE
option.
2. Cable Connector – Connection port for
the DigiPREP MS umbilical cable to
controller.
3. Power Switch/ Power Cord Receptacle –
On/Off switch – contains circuit breaker
and receives the female end of the power
cord.
4. DigiSET Connector – Connection port
for DigiSET. DigiSET will automatically
shut off the digestion block when a
pre-set sample volume is reached.
DigiSET dongle must be installed to run
DigiPREP MS without the DigiSET
option.
5. DigiPREP Controller – DigiPREP MS is
designed to be used with DigiPREP
KeyPad* or Touch Screen* controller
(*Sold separately).
6. DigiPROBE well – Use with replaceable
glass liner.
7. Voltage Selector Switch-Select appropriate
voltage. If 115 V is showing, system is
running at 115 volts.
To Next Page
Loading...
