SCP SCIENCE
54
KeyPad
Version 1.0
HEAT DEFLECTOR ASSEMBLY
2) Install heat defl ector as shown. Lips on
side & bottom.
3) Push heat defl ector in and fl ush at bottom.
4) Use fi ngers to push top snug to lip on
Dual-Zone insert rack.
5) Place fi ngers through holes in top of rack to
reach heat defl ector.
1) If evaporation times are too long, Heat
Defl ector shields may be installed (option
product number 010-520-032) They push
into place as shown in the following
instructions.
To Next Page
Loading...
