Focus mode
This function allows enabling or disabling the “Focus
mode” (see page 97).
●
From the Interactive Menu, use (1) and
(2) to select the item menu" and press
ENTER (3).
●
Select the “Display” item and press ENTER (3).
●
Select the “Focus Mode” item and press ENTER
(3).
“On” and are displayed.
While the currently set level is shown on the right.
Use (1) and (2) to scroll and select the desired
item. Press ENTER (3) to confirm: if the item “On” is
selected the screen (Fig 116) is displayed, press
ENTER (3) to confirm and return to the previous
screen.
...
Back Off
OnFocus mode
Themes
Brightness
Back
Back
Fig 115
Please note: when Focus Mode is On
you need to press a control button in
order to reactivate the interface.
OK
Gear
N
Fig 116
143
To Next Page
Loading...