The display shows the first of the 4 digits active for
the entry (Fig 119).
Entering the code:
●
The values displayed above and below the digit
indicate that the number can be changed from 0
to 9 using (1) and (2).
●
Press ENTER (3) to confirm and move on to the
following digit.
●
Repeat the procedure until entering all 4 digits.
Once the last digit has been confirmed, “Save?” is
displayed (Fig 121).
Press ENTER (3) to confirm, “Saved” is then
displayed for a few seconds and the instrument
panel returns to the previous screen.
148
To Next Page
Loading...