Modify PIN
●
From the Interactive Menu, use (1) and
(2) to select the item menu" and press
ENTER (3).
●
Select the “PIN Code” item and press ENTER (3).
●
Select the “Modify PIN” item (Fig 122) and press
ENTER (3).
●
The display shows "Current PIN", press ENTER
(3) to proceed with entry (Fig 123).
Entering the code:
●
The values displayed above and below the digit
indicate that the number can be changed from 0
to 9 using (1) and (2).
●
Press ENTER (3) to confirm and move on to the
following digit.
●
Repeat the procedure until entering all 4 digits.
Once the digit is entered, press ENTER (3) and
the instrument panel behaviour will be as follows:
●
If the entered PIN is correct, the display shows
“Correct”.
●
If the PIN entered is incorrect, “Wrong” is
displayed and a new to enter the
current PIN can be made.
If the PIN is correct, enter the new PIN.
Bluetooth
Date and time
PIN code
Display
DRL
Modify PIN
Back
Gear
N
Fig 122
Bluetooth
Date and time
PIN code
Display
DRL
Current PIN
1
2
0
Back
Gear
N
Fig 123
147
To Next Page
Loading...