Settings of the unit will remain until change to the existing
settings is made.
To enter the Setup menu
From the Main Screen: Use the UP/DOWN scroll button and
LEFT/RIGHT scroll button to select Setup, and press the OK button.
Follow the instructions to make adjustments and settings as described
in the above setup options. (Figure 3.3)
Figure 3.3
Language Setup
English is the default language.
1) From System Setup screen, use the UP/DOWN scroll button to
select Language, and press the OK button.
2) Use the UP/DOWN scroll button to select the desired language
and press the OK button to save your selection and return to
previous screen. We provide three language options currently.
(Figure 3.4)
System Setup 1/8
Language
Configure Monitors
Unit of Measure ?
Key Beep Set
Status Beep Set
Tool Self-test
Tool Information
To Next Page
Loading...
