7) During the update procedure, the scan tool displays a message
“Update Program. Please wait…”.
8) When the update has finished, the scan tool will display a
message “Program Update has been done!”
9) Restart the scan tool to finish the whole update.
NOTE: If you make an incorrect choice and the scan tool is unable
to work properly, you may need to update the programs. Hold
LEFT scroll button and power on the scan tool, this will enter the
Update Mode. Then follow the update procedure to refresh
the program.
3.9 Vehicle Coverage
The TA500 EOBD Scanner is specially designed to work with all
EOBD compliant vehicles, including those equipped with universal
protocol -- Control Area Network (CAN).
For your vehicle to be EOBD compliant it must have a 16-pin DLC
(Data Link Connector) under the dashboard and the Vehicle Emission
Control Information Label must state that the vehicle is EOBD
compliant.
3.10 Product Troubleshooting
To Next Page
Loading...
