Sealey TA500 - Viewing Freeze Frame Data

48
Figure 5.28
 If there is no recording in selected location, a message “Not
Supported or Stored No Data” displays on the screen.
3) Use the UP/DOWN button to view recorded PIDs of each frame.
Figure 5.29
4) Use the LEFT/RIGHT button to view PIDs of next or previous
frames.
Figure 5.30
5.4 Viewing Freeze Frame Data
1 of 135 frame …
6
DTC_CNT 0
FUELSYS1 OL
FUELSYS2 N/A ?
LOAD_PCT (%) 0.0
ETC(℃) -40
SHRTFT1(%) 99.2
6 of 135 frame
4
DTC_CNT 0
FUELSYS1 OL
FUELSYS2 N/A ?
LOAD_PCT(%) 0.0
ETC(℃) -40
SHRTFT1(%) 99.2
Select Memory 3/3
Location #1 *
Location #2
Location #3 * ?