UP/DOWN button to view additional information on
previous/next screens.
For manufacturer specific codes, select a vehicle
make on an additional screen to look for DTC definitions.
If definition could not be found (SAE or Manufacturer
Specific), the scan tool displays “Please refer to vehicle
service manual!”
For code breaker information, you need to press the “?” Help
button.
In the Code Breaker screen, there are three options to assist user to
understand DTC more: System Description and Quick Check to
read detailed description of DTCs, General Notes to view helpful
repair information of DTCs.
4) To view previous or next DTC in the built-in DTC library, use the
LEFT/RIGHT button.
5) To enter another DTC, press the ESC button to return to previous
screen.
6) To exit to Main Screen, press the ESC button.
3.8 System Setup
The scan tool allows you to make the following adjustments and
settings:
1) Language: Selects the desired language.
2) Configure Monitors: Sets the monitors you want to test.
3) Unit of measurement: Sets the units to Imperial or Metric.
4) Key Beep Set: Turns on/off beep.
5) Status Beep Set: Turns on/off the I/M Readiness Status beep.
6) Tool Self-test: Checks if the LCD display, LED lamps and
keyboard are working normally.
7) Tool Information: Views the important information of the tool.
8) Update Mode: Accesses the Update Mode.
To Next Page
Loading...
