116 •
... the "APrt" and "Time"
menu items are not
visible in the rf menu?
•No wireless printer logged on in the wireless
group
-Use the "lrn" menu item to log the wireless
printer into the wireless group (see “Set up
wireless group (Lrn)” on page 109).
… the
Er:x:11: display
appears?
The scales are too high, or too great a load is
applied at one point.
-Reduce load on scales or distribute weight
more evenly
-Restart scales.
… the
Er:x:12: display
appears?
The scales have been switched on with too great
a load.
-Reduce load
-Restart scales.
… the
Er:x:16: display
appears?
Oscillations have been induced in the scales,
preventing determination of the zero point.
-Restart scales
… when the Enter key is
pressed and the
Er:x:71: display
appears?
Data transmission not possible, wireless module is
disabled.
-Activate wireless module (see “Activate/
Deactivate wireless module (system)” on
page 112).
… when the Enter key is
pressed and the
Er:x:72: display
appears?
Data transmission is not possible, no wireless
group set up.
-Set up wireless group (see “Set up wireless
group (Lrn)” on page 109).
Malfunction Cause/Remedy
To Next Page
Loading...
