Seca 374 - Use Additional Functions; Navigate in the Menu; Beep

Operation • 43
English
5.2 Use additional functions
Additional functions are available in the menu for the
scales. This allows you to configure the scales perfectly
to your own needs.
* The menu item "rF" is described in section “Operate
scales in a wireless group" on page 49.
Navigate in the menu 1. Switch on scales.
2. Hold down the Enter key and the arrow key simul-
taneously.
The last menu item selected is shown in the display
(here: Autohold "Ahold").
3. Keep pressing the arrow key until the required
menu item appears in the display (here: attenuation
"Fil").
4. Confirm your selection with the Enter key.
The current selection for the menu item or a sub-
menu is displayed (here level "0").
rF*
Reset
Autohold
• on
• off
Fil
• 0
• 1
• 2
Beep
• on
• off
• on
• off
Press
Hold
Unit
• kg
• lbs
BMIF
• Sto 1
• Sto 2
• Sto 3
• -Sto1
• -Sto2
• -Sto3
….
Store
Calc
hold
tare
send
print
hold
tare
send
print