Seca 374 - Select Attenuation (Fil); Switch Weight Unit (Unit)

46 •
3. Select a menu item:
– Press: Acoustic signal whenever a key is
pressed
– Hold: Acoustic signal with a stable weighing
value.
4. Confirm your selection.
The current selection is displayed.
5. Select the setting you require:
–On
–Off
6. Confirm your selection.
You will leave the menu automatically.
7. If you also wish to activate the acoustic signal for
the second function, repeat this procedure.
Select attenuation (Fil) You can use attenuation (Fil = filter) to reduce any inter-
ference during weighing (e.g. caused by patient mov-
ing).
1. Select the item "Fil" in the menu.
2. Confirm the selection.
The current selection is displayed.
3. Select an attenuation level.
– 0: low attenuation
– 1: moderate attenuation
– 2: high attenuation
4. Confirm the selection.
You will leave the menu automatically.
Switch weight unit
(Unit)
With uncalibrated scales you can select the unit you
wish to use for displaying the weight.
1. Select the item "Unit" in the menu.
2. Confirm the selection.
The current selection is displayed.
Select the unit you wish to use for displaying the
weight:
– kilos (kg)
– pounds (lbs)
3. Confirm the selection.
You will leave the menu automatically.