What to do if the display "tEMP" appears on Seca 644 Scales?
If the display "tEMP" appears on the Seca Scales, it means that the ambient temperature of the scale is either too high or too low. To fix this, set up the scale in an ambient temperature between +10 °C and +40 °C. Alternatively, wait for around 15 minutes until the device has adapted to the ambient temperature.
How to fix Seca Scales when no weight is displayed with a load?
If no weight is displayed on your Seca Scales when there is a load on it, check whether the scale is switched on.
Why does '0.00' not appear on Seca 644 before weighing?
If 0.00 does not appear on your Seca Scales before weighing, it could be because a load was already on the scale before it was switched on. Remove the load from the scale. Another reason could be an unspecified error, so try switching the scale off and back on again.
What to do if Seca Scales display 'StOP'?
If the display on your Seca Scales shows "StOP", it means the maximum load has been exceeded. Remove some of the load from the scale.
General| Graduation | 100 g |
|---|---|
| Display | LCD |
| Functions | TARE, HOLD, BMI |
| Power Supply | Batteries |
| Type | Digital medical scale |
| Capacity | 300 kg |
To Next Page
