SECOP 101N08 Series User Manual

16
Operating
Instructions
2.3.4 Connect to Network Through Bluetooth
®
Gateway
1. Attach or turn on the Bluetooth
®
radio adapter (transceiver) for your Windows XP computer.
2. Turn on the Secop Bluetooth
®
gateway by pressing briefly on the push button.
The LED will blink green.
Please note!:
The gateway runs for 60 seconds before shutting down automatically.
At each step of the pairing process, check that the LED is still blinking.
If one stage of the pairing fails, turn the gateway on again, and try again.
3. Open Bluetooth
®
Devices in Control Panel/Printers and Other Hardware (Category view) or
Control Panel (Classic view).
Windows XP
Control Panel Category View:
Control Panel Classic View:
In order to communicate, Bluetooth
®
devices must first be paired. Pairing is performed before
using the device for the first time. Pairing does not need to be repeated for subsequent use.
Please choose the operating system installed on your computer.

SECOP 101N08 Series Specifications

General

Brand	SECOP
Model	101N08 Series
Category	Controller
Language	English