SECOP 101N08 Series User Manual

27
Operating
Instructions
3.
TOOL4COOL
®
SOFTWARE
INTERFACE
The controller can be programmed and optimized from a PC using the Tool4Cool
®
software
An example of the Tool4Cool
®
user interface showing the main parameter groups of the BD Con-
troller 101N08xx Series 12-24 V DC is shown below.
Example:
The Tool4Cool
®
software enables the user to observe and document certain aspects of the
compressor operation via the controller. The output of the software is in the form of data logs and
plots.
Using Tool4Cool
®
the user can also change the settings of the controller parameters, and copy
settings from one controller to another. Please refer to the Tool4Cool
®
LabEdition Operating
Instructions for operation instructions.
3.1
User Interface
3.2
Operation

SECOP 101N08 Series Specifications

General

Brand	SECOP
Model	101N08 Series
Category	Controller
Language	English