SECOP 101N08 Series User Manual

32
Operating
Instructions
Parameter
Group
Parameter Description Default Min
value
Max
value
Step
size
Unit Type
Compressor safety
Restart delay
Delay before restart after
short cycling
60 60 120 1 sec
Communication
Node number
(application module)
Modbus address 1 1 247 1 Setting
Bits per second Communication speed
19200
bps
9600
bps
19200
bps
1 Setting
Set Main Switch to OFF
when communication ti-
meout occurs
0 0 1 1
0 = OFF
1 = ON
Setting
Communication timeout
Maximum duration of each
communication attempt.
900 15 7200 1 sec Setting
Settings protection code
Privacy function code must
be entered twice
0 0 9999 Setting
Settings protection status 0 1 0 1 Measurement
Product information application module
Unit name
The user’s own identification
for the unit can be entered
here (optional)
0 0 250 1 characters
Product code
(Code number)
Secop product code number Measurement
Firmware version
Application module software
version
Measurement
Unit ID Secop unit ID Measurement
Production Date Secop production date Measurement
Serial (Serial number) Secop serial Measurement
Vendor name Vendor name Measurement
ProdText (Text that
appears on the label)
Product code Secop product code number Measurement
Firmware
Compressor module softwa-
re version
Measurement
Production Date Secop production date Measurement
Serial (Serial number) Secop serial Setting
Vendor name Vendor name Measurement
ProdText(Text that
appears on the label)

SECOP 101N08 Series Specifications

General

Brand	SECOP
Model	101N08 Series
Category	Controller
Language	English