SECOP 101N08 Series User Manual

30
Operating
Instructions
Parameter
Group
Parameter text Description Default Min
value
Max
value
Step
size
Unit Type
Compressor 2
Requested speed
Compressor speed and therefore
capacity definition
4000 2500 4000 1 rpm Setting
Start delay
Time to start after compressor is
switched ON
8 2 240 1 sec Setting
Start Speed
Optional start-up speed lower than
Requested speed, during the period
Start time
2500 2500 4000 100 rpm Setting
Start time
Period of time elapsing after start-
up of compressor until Requested
speed is reached
30 0 600 5 sec Setting
Compressor speed Real-time speed (+/- 10%) 100 rpm
Measure-
ment
Supply voltage
Real time voltage
measured on + and - terminals
V
Measure-
ment
Condenser fan
Condenser fan speed
Condenser fan speed synchronized
with compressor operation
100 40 100 1 % Setting
Condenser fan start
delay
Time to start as a function
of Thermostat
0 0 240 1 sec Setting
Condenser fan stop
delay
Time to stop as a function
of Thermostat
0 0 240 1 sec Setting
Condenser fan forced
ON
Force condenser fan continuously
ON or OFF
0 0 1 1
0 = OFF
1 = ON
Setting
Detect missing
condenser fan
Detect whether condenser fan is
connected
0 0 1 1
0 = OFF
1 = ON
Setting
Condenser fan speed Real-time condenser fan speed % Setting
Evaporater fan
Evaporator fan speed
Evaporator fan speed synchronized
with compressor operation
100 40 100 1 % Setting
Evaporator fan start
delay
Time to start as a function
of Thermostat
6 0 240 1 sec Setting
Evaporator fan stop
delay
Time to stop as a function
of Thermostat
0 0 240 1 sec Setting
Evaporator fan forced
ON
Force condenser fan continuously
ON or OFF
0 0 1 1
0 = OFF
1 = ON
Setting
Detect missing Eva-
porator fan
Detect whether condenser fan is
connected
0 0 1 1
0 = OFF
1 = ON
Setting
Evaporator fan speed Real-time condenser fan speed %
Measure-
ment

SECOP 101N08 Series Specifications

General

Brand	SECOP
Model	101N08 Series
Category	Controller
Language	English