SECOP 101N08 Series User Manual

46
Operating
Instructions
4.3.1 Error log
The error log records the following data for each error arising:
• Time of occurrence related to compressor power up, with 1 sec as sample time
• The sequence of occurrence
• Number of occurrence (when no value is related to the parameter)
• Error name
• Sub Error name
• The value of the parameter which caused the failure (if connected to a parameter)
• Event list reference (changes which caused the failure if a parameter change caused the failure)
The error log can be cleared using the clear function.
4.3.2 Event log
The event log records the following parameter and event data to assist in service situations:
• Parameter changes (Parameters defined in the parameter)
• Power up
• Start/Stop signal from application module
The following information is recorded for each event:
• Time of occurrence related to compressor power up, with 1 sec as sample time
• The sequence of occurrence (Event list reference)
• Parameter/Event description
• The value of the parameter
• Number of occurrence (when no value is related to the parameter)
4.3
Error and Event Logs

SECOP 101N08 Series Specifications

General

Brand	SECOP
Model	101N08 Series
Category	Controller
Language	English