1. Attach or turn on the Bluetooth
®
radio adapter (transceiver) for your Windows 7 computer.
2. Turn the Secop Bluetooth
®
gateway on by pressing briefly on the push button. The LED will
blink green.
Please note:
The gateway runs for 60 seconds before shutting down automatically.
At each step of the pairing process, check that the LED is still blinking .
If one stage of the pairing fails, turn the gateway on again, and try again.
3. Add a Bluetooth
®
device from Control Panel/Hardware and Sound.
This shall search and display nearby Bluetooth
®
devices:
4. Select the Secop device, then click Next.
Windows 7
To Next Page
Loading...
Need help?
General
