Seculine Zigview - Screen Adjustment; Size Adjust

SECULINE Co., Ltd.
ZIGVIEW
Digital Angle View Finder
12
Push and hold the Navigation button to the right, and the Setup Menu appears.
Push the Navigation button up and down to go to the Size Adjust menu. And push
the right side and the arrow ( ) appears on the up and down of the left side.
Push the Navigation button to the left and right to adjust the size of the left screen.
Push the Navigation button up, and the arrow ( ) appears on the left and right at
the top.
Push the Navigation button up and down to adjust the size of the top screen.
Push the Navigation button to the right, and the arrow ( ) appears at the top and
bottom of right side.
Push the Navigation button to the left and right to adjust the size of the right screen.
Push the Navigation button down, and the arrow ( ) appears on left and right at the
bottom.
Push the Navigation button up and down to adjust the size of the bottom screen.
When the size adjust is completed, press center of the Navigation button shortly.
Screen Adjustment
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Size Adjust
When ZIGVIEW is installed, screen sizes may vary in right, left, up, and down depending on cameras.
Adjust the screen size to fit your camera.
You can adjust the screen in left-up-right-down directions respectively.
Turn on the power switch and the LCD screen appears.
========SETUP (v0.95)========
■
Size Adjust ➧
■
AE Mode ➧ AVG
■
AE Compensation +5
■
Negative Effect OFF
■
B/W Effect OFF
■
Back-Light Brightness 10
■
Extra Zoom out OFF
■
Display Battery Status ON
■
Display Zoom Status ON
■
Save and Load ➧
2
2
4
6
8