EasyManua.ls Logo

Seculine Zigview - Troubleshooting

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SECULINE Co., Ltd.
ZIGVIEW
Digital Angle View Finder
22
1. Images on the camera view finder is shown partially or too small.
When you first use the product or if the values are set at factory or a connected camera is changed, you have to adjust
the screen size to the camera to be used. Please refer to the manual and adjust the size of images.
2. The product is not working even after the power switch is turned on.
The product does not work if the battery is not charged. Neither does it work when the battery is exhausted. When the
product does not work after charging the battery for certain hours, please call the nearest service center.
3. Battery is not charged even though the adapter is connect.
Please check whether the light of the charging lamp is on. Check the connection of the charger and if the battery is not
charged after certain hours, please call the nearest service center.
Warranty period of the supplied battery is six months. The performance of the battery can be degraded when it is neg-
lected or is not used for a prolonged time.
4. Still images appear briefly when power is on.
When power is off, the last image of the previous screen is saved. So, the saved image may be seen briefly when the
power switch is turned on. This does not mean malfunctioning of the product. You can continue using the product.
5. Images do not change and remain still.
Initialize the product by pressing the Reset button. Turn off the power switch and turn it on again if the product still does
not work properly. If still images are displayed long after external shock is applied, it may indicate malfunctioning.
Please call the service center.
6. The Navigation button cannot be pushed or is malfunctioning.
The navigation key installed in the product is a high precision device. If you apply excessive force, it may cause mal-
functioning. Please push the left, right, up, down and center of the navigation button precisely.
7. Adapter is not attached to the main body.
Please check the provided adapter meets the local specifications. Please check whether the main body of the adapter
is damaged. If the adapter is damaged or broken down, you can purchase an adapter separately.
Troubleshooting