Seculine Zigview - Setting the Extra Zoom out

SECULINE Co., Ltd.
ZIGVIEW
Digital Angle View Finder
16
Setting the Extra Zoom Out
Sets the zoom range of the screen.
Turn on the power switch and the LCD screen appears.
1. Push the Navigation button to the right, and the Setup Menu appears.
2. Push the Navigation button up and down to move to the Extra Zoom out menu.
Then, push the Navigation button to the right.
3. Push the Navigation button up and down to select ON/OFF.
Set to ON: Approximately 50% ~ 200% Zoom Range
Set to OFF: Approximately 100% ~ 200% Zoom Range
4. Push the Navigation button to the left to exit the menu.
Using ZIGVIEW
========SETUP (v0.95)========
■
Size Adjust ➧
■
AE Mode ➧ AVG
■
AE Compensation +5
■
Negative Effect OFF
■
B/W Effect OFF
■
Back-Light Brightness 10
■
Extra Zoom out OFF
■
Display Battery Status ON
■
Display Zoom Status ON
■
Save and Load ➧
2
========SETUP (v0.95)========
■
Size Adjust ➧
■
AE Mode ➧ AVG
■
AE Compensation +5
■
Negative Effect OFF
■
B/W Effect OFF
■
Back-Light Brightness 10
■
Extra Zoom out ON
■
Display Battery Status ON
■
Display Zoom Status ON
■
Save and Load ➧
3