CASE 2: it’s ok to move the machine without disassembling in a short distance and enough
space. Pay attention to avoid any collision and unnecessary damage when moving
the machine
Unscrew 2pcs of screws with cross screwdriver
Unscrew 2pcs of M8*35 screws
with 6mm hexagonal key
Caution! The work of disassembling for the
billboard needs at least two people, steady
the billboard first, and then unscrew all
screws, put it down carefully at last.
8. PRECAUTIONS WHEN MOVING THE MACHINE
To Next Page
Loading...
