19. MAINFRAME POSITION
IMPORTANT
19-1 RINGEDGE2 – LOCATION
The machine is fitted with a Ringedge 2 Game Board and several other Ancillary
Boards which are mainly housed inside the Base Box. Only qualified Personnel should
attempt to Service these Units.
The Game Board Unit is located under the Player Seat, and to gain access the following
procedure should be carried out.
Using cross screwdriver to loosen the screw cross M4*25
Open the base box side door with 919key.
Static electricity from your body may damage some electronics devices
on the IC board, before handling the IC board, touch a grounded metallic
surface, so that the static electricity can be discharged.
WARNING
When returning the game board after making repairs or replacements, make sure that there are
no errors in the connection of connectors. Erroneous connections can lead to electrical shock,
short circuits or fires.
When connecting a connector, check the direction carefully. Connectors must be connected in
only one direction. If indiscriminate loads are applied in making connections, the connector or its
terminal fixtures could be damaged, resulting in electrical shock, short circuits or fires.
Control PCB's located
inside Base Box
To Next Page
Loading...
