10-4 INPUT TEST
Look up the status of each input devices.
INPUT TEST screen
■Control
- Press TEST button and SERVICE button at the same time to return to GAME TEST MODE
screen.
- When the corresponding menu items displays from “OFF” to “ON” or corresponding data
reacts to the action,
the device is then functional.
■Menu Item
Move the Player 1 (left side) controller to up, down, left and right, and the data (x
and y axis of the controller) varies based on your movement.
PLAYER1 CONTROLLER
TRIGGER L
Pull the Player 1 controller’s left trigger, the item will display “ON”, release the
trigger, the item will display “OFF”.
PLAYER1 CONTROLLER
TRIGGER R
Pull the Player 1 controller’s right trigger, the item will display “ON”, release the
trigger, the item will display “OFF”.
Press the Player 1 START button, the item will display “ON”, release the button,
the item will display “OFF”.
Move the Player 2 (right side) controller to up, down, left and right, and the data(x
and y axis of the Controller) varies based on your movement.
PLAYER2 CONTROLLER
TRIGGER L
Pull the Player 2 controller’s left trigger, the item will display “ON”, release the
trigger, the item will display “OFF”.
PLAYER2 CONTROLLER
TRIGGER R
Pull the Player 2 controller’s right trigger, the item will display “ON”, release the
trigger, the item will display “OFF”.
Press the Player 2 START button, the item will display “ON”, release the button,
the item will display “OFF”.
Press SERVICE button, this item will display “ON”, release the button, the item
will display “OFF”.
Press TEST button, this item will display “ON”, release the button, the item will
display “OFF”.